← All guides Guide

PLA, PETG or TPU: which material fits your print?

Most custom prints are made from a handful of plastics. You do not need to know the chemistry: what matters is where the object will live and what it has to survive.

PLA: the default for display pieces

PLA prints with crisp detail and comes in the widest range of colours, including matte and silk finishes. It is the usual choice for figurines, keepsakes, signs, models and indoor decorative parts.

Its weakness is heat. PLA softens at fairly low temperatures, so it is a poor fit for a car dashboard, a sunny window ledge or anything near a heat source.

PETG: tougher and more heat tolerant

PETG bends a little before it breaks and handles warmth and moisture better than PLA. It suits clips, brackets, covers and other everyday functional parts.

Surfaces are usually glossier and fine detail is slightly softer than PLA.

TPU: flexible

TPU is rubber-like. It is used for bumpers, grips, gaskets and feet that must flex or absorb knocks. It is slower to print and not suited to fine decorative detail.

How to choose

  • A gift or display piece that stays indoors: PLA, often in a matte finish that hides layer lines.
  • A part that is handled, clipped or lightly loaded: PETG.
  • A part that must flex or grip: TPU.
  • Outdoors, in a hot car or in sunlight for long periods: ask about ASA or another outdoor-rated plastic.
  • Food contact, medical use, child-safety or load-bearing safety parts: these need certified processes, not a general print service.

What your shop actually stocks

Every shop stocks different materials and colours, and stock changes. Check the material list when you start a project, or say what the part has to withstand and let the shop recommend one.

Questions before you start

Frequently asked questions

Is PLA strong enough for a replacement part?

For light indoor duty such as a knob or a cover, often yes. For parts that flex, carry weight or get warm, ask for a tougher material.

What is PLA Matte?

PLA with a non-glossy finish. It hides layer lines and fingerprints better, which suits figurines and signs.

Can a printed part go outside?

Standard PLA can warp and fade in sun and heat. Ask for an outdoor-rated material if the part will live outside.

Toronto, GTA & beyond

Custom 3D printing, with help from the first idea.

Based in Toronto, Ontario. Custom 3D printing for Mississauga and the Greater Toronto Area, with shipping across Canada and the US.

No modelling experience needed. Share your requirements and target date; we confirm feasibility, costs and delivery timing for your project.

Tell us what you need
Get a free quote